Picosecond Laser Pen Light Therapy Tattoo Scar Mole Freckle Removal
Product introduction
The difference between red light picosecond and blue light picosecond -
-The power and effect of blue light picosecond pen is more powerful. More professional work required. Please start with the lowest frequency, then slowly adjust to a suitable level.
-The blue laser pen has 9 levels of frequency mode, different output frequency and wavelength. The flash area is larger.
-The red laser pen has 3 frequency mode, its flash area is smaller. Suitable for fine operation.
-Both of them are designed to remove tattoos, moles, spots, etc., mainly applied to melanin.
Blue light wavelength 450 nm. Red light with a wavelength of 850 nm.
Theory of Portable Picosecond Laser Pen
The PicoSecond Laser uses ultra-short pulses (one trillionth of a second in length) to hit the melanin with a great pressure, the melanin shatters into tiny dust-like particles. Because the particles are so small, they are more readily absorbed and eliminated by the body. This can mean better clearance of the melanin and less treatments overall.
Advantage of picosecond laser pen
1) More effective to clean pigments
compared with traditional laser cure,the picosecond will focus more than 20 times energy.can shatter the pigment to bitty powder and be easy to metabolism.
2) Faster speed to clean pigments
compared with traditional laser cure.picosecond.so it can reach a expected effect in a very short time.meanwhile the picosecond is no harmful to skin tissue and no nursing period.
3) No re-black risk:
under the fast and strong assault of the picosecond.it cause overwhelming damage to melanin.and that will avoid the possibility to re-back
4) Clean the pigments meanwhile activate skin repair mechanism
at the same time when picosecond laser shatter the melanin,the shock wave will come into the deep skin and activate skin repair mechanism.and promote collages metabolism.
Package includes:
1 x laser pico second pen.
1 x charging cable.
1 x safety glasses, 1 x repair sticker.
1 x manual.
Product parameters
Needle Depth: 0.2-2.5mm
Input voltage: AC110/220V,60/50 Hz
Output voltage: 5V,1.5A
Power: 7.5 W
Wavelength: red:850nm, blue:532nm
Working frequency: Red: 3MHz, Blue: 9MHz
Operation instruction
1. Connect the power and the machine will be powered, the digital tube will display
2. Press the "Inten" and "Fre/Hz" buttons to select the intensity and frequency. We suggest starting with the lowest intensity and frequency and then updating as needed.
(Note: Level 9 is the highest frequency for Blue laser pen. Level 3 is the highest frequency for Red lase pen.)
3. Coated with anesthesia If you are afraid of pain, there will be a little pain when using the laser pen, feels like intravenous injection.
4. Wear safety glasses.
(Note: The blue laser pen needs to wear safety glasses because it keeps flashing while the red laser pen is not needed)
5. Put the pen hole to the place where you want to work for the blue laser pen, press the Switch button continuously, then a laser beam will appear, stop pressing the Switch button after 1-2 seconds, then repeat.
(Note: For the Blue Laser Pen, we recommend NOT staying in one place for more than 2 seconds. For the Red Laser Pen, we recommend NOT staying in the same place for more than 1 second.)
6. Red and blue light affect melanin after surgery, you will see the mole will become more black, then you can stop, after a few days it will fade and even disappear. For some moles, he will not destroy it, he will leave it to shed naturally.
7. Cover the Revitalizing Extract immediately after surgery, repeat the use of Revitalizing Extract in the following days, do not expose to the sun, otherwise the skin will be sunburned and turn red.
8. Repeat this every few days if necessary.
Note
1.Before using the pikosecond pen, the skin should be coated with anesthetics.
2. After use, it should be coated with repair products to repair the skin and prevent bacterial infections.
Please start from the lowest level, then slowly adjust to the appropriate level.
4.Blue laser pen: 9 levels is the lowest frequency.
5. Do not stay in the same place for more than 2 seconds when you work.
6. The blue light only affects melanin.
7.Before the operation, it is recommended to practice repeatedly on black paper to determine the ability and then to operate with the face.
8.Let the scab automatically run off when there is a scab.
10.Do not use irritating or excitability skin care products. Avoid sunlight.
11.Not make up
12.Easily wash your face with a damp cotton swab. Avoid the operating place, avoid infection caused by improper care, and dry the water in time
13.Prohibit the operation of the picosecond in the position of the prosthesis in the face.
